Zooz Outdoor Motion Sensor ZSE70 800 Series Z-Wave / Motion, Temp, Lux

PRODUCT HIGHLIGHTS

• Security alerts: Get instant motion reports to your Z-Wave hub whenever movement is detected.
• More climate data: Monitor temperature outdoors or indoors and use this information to trigger connected devices in your system.
  
• Smart lighting: program your Z-Wave outdoor lights to come on when the Zooz sensor reports motion and lux levels below your preferred set point
• Power it with 2 CR123A batteries (included) or a 12-24 V AC/DC connection (sold separately)
  
• Works as Z-Wave signal repeater when powered with 12-24 V AC/DC (do NOT pair the sensor on USB cable and then switch to batteries)
• 800 series Z-Wave chip: more range for reliable wireless communication
  
• SmartStart and S2 authenticated security
• Advanced settings to customize your sensor, including the ability to disable reporting for any sensor
•  CHECK HUB COMPATIBILITY BEFORE BUYING (NOT SUPPORTED BY WINK OR ALARM PANELS) 
• Modern minimal design with a multi-directional mini mounting bracket
  

NOTE: Z-Wave gateway controller required - sold separately. You need a security enabled controller to take full advantage of the product.

SPECIFICATIONS

• Z-Wave Region: UK/EU
• Z-Wave Chip: 800 series
• Power: 2 CR123A battery (included) / 12-24 V AC/DC (sold separately)
• Z-Wave Range: Up to 150 feet line of sight
• Motion Detection: 30 feet
• Operating Humidity: 8%- 100% non-condensing
• Light Sensor Detection Range: 0 – 65535 lux
• Operating Temperature: 14°F to 122°F (with accuracy of ±2°C)
• Dimensions: 2.34” x 2.4” x 2.75”
• Installation: Indoor / Outdoor (IP66 rated)

RESOURCES 

Zooz 800 Series Z-Wave Long Range Outdoor Motion Sensor ZSE70 800LR Manual (PDF)

Advanced Settings

Support Portal

WORKS WITH